How to better laminate printed product with an Interactive Repeat Length System

Magazine for Textiles, Clothing, Leather and Technology

Many of the laminated nonwoven products we use are designed not only with the practical use in mind, but also to be visually appealing. From printed diapers and feminine hygiene products to colorful prints on medical gowns and drapes, we enjoy having something nice to look at.

For this reason, the graphic applications on nonwoven laminates are increasing as more and more people take into consideration the design of the products.

However, along with this desire for printed laminated nonwovens comes a few unique challenges during the production process. It turns out that it’s not as simple as feeding the nonwoven material through a printer to produce a repetitive pattern and then laminating it. 

Let’s take a look at the two most significant challenges you have to face when laminating printed nonwovens.

Challenges in printed product lamination

One of the most significant challenges when it comes to printed product lamination is choosing the right ink. Whether solvent-based or water-based, the ink must adhere well to the substrate, dry sufficiently and be able to withstand the heat used during the lamination process. These inks must also be safe, odourless and have a high gloss.

Of course, choosing the right ink is a pre-printing challenge. The greatest challenge during the actual printing process is establishing, setting and maintaining the repeat length of the printed pattern.

Without repeat length consistency, the print can end up having inconsistent dimensions as it is applied to the material, making the product look inferior and decreasing the visual appeal and value of it.

What the repeat length is and how to measure it

The repeat length is the measurement of the distance between two identical points on two successive patterns. This includes both the pattern and any unprinted space between the patterns. It is important to note that setting a single repeat length is not necessarily the answer when it comes to printing a repeating pattern evenly on a nonwoven substrate.

Instead, the repeat length settings must take into account how extensible the substrate is, how it will react when being wound and how the material is likely to relax over the first few days after it has been laminated.

This may mean you need to create an adjusted repeat length profile for a repeating pattern so it will change as the material on which it is printed changes due to the conditions it is exposed to (tension, drying, aging, etc…). 

Advantages of an Interactive Repeat Length System

When laminating printed nonwovens, it is critical to have a printer equipped with sensors, data collection and the ability to automatically adjust repeat length as needed.

The Interactive Repeat Length System developed by A.Celli, used also in our printing machines, it allows to detect the repeat length variation during the production process.

By using our solution, you will enjoy several distinct advantages:

  • Full control over every aspect of the production process. This includes performing different types of feedback on the process to stabilize the repeat length and make automatic adjustments when necessary.
  • The ability to measure the repeat length and have full control over it with the use of an optical sensor that delivers data in real-time.
  • Detect any deviation from the nominal values and archive the measurements to ensure comprehensive reporting. This way, you can detect anomalies and defects when they happen and can make immediate changes to the settings to ensure a flawless final product.

When it comes to the measurements of the repeat length, the Interactive Repeat Length System will:

  • Provide complete control over the quality and traceability of previous works to  manage complaints about quality issues 
  • Enable the analysis of multiple productions to determine potential areas of process improvement
  • Give total freedom to the operator to control the overall quality of the production
  • Provide a screen display of a graph of the repeat length along the roll, comparing that with a reference value and associated tolerances
  • Archive and analyze all previous works and measurements
  • Allow the operator to set the job data and nominal values of the repeat length or save and load a reference curve

With this level of control and the ability to view the data and make changes in real-time, you can streamline the production of your printed laminated nonwoven products without losing quality. In fact, thanks to this you will be able to make a superior product with clear, visually appealing graphics and top performance.

 

Source: www.acelli.it